Graphite Coating Screen Printing For Plunger Piston Compressor

Clean and sweep the machine before you are using, lubricate guide rails, guide pillars, bearings, and some other moving parts.
The worktable is an important part for the printing quality and should protect it from being hit by hard objects when the machine is working, we should make sure that the ink, banana oil and other organic solvent would not drip onto the machine.

Application:

The unit is suitable for graphite coating of screen-printing for plunger/piston/compressor, which is high precision, wear resistance, coating evenly, and fully meet the standard. It can form high gloss and strong lubricating higher hardness film and it is lifelong.

Features:

Clean and sweep the machine before you are using, lubricate guide rails, guide pillars, bearings, and some other moving parts.
The worktable is an important part for the printing quality and should protect it from being hit by hard objects when the machine is working, we should make sure that the ink, banana oil and other organic solvent would not drip onto the machine.
Prevent the electrical control panel and keys from being damaged by banana oil and another solvent.
Clean the dirt inside the oil mist assembler as soon as possible, avoid contamination into pneumatic components, to affect the normal work. Put lubricating oil into the oil mist assembler cup regular intervals.
Loosen the tightening nuts before adjusting the flow-limiting valve.
Turn off the power when you are off work, clean the screen.

Technical Parameters:

Model	TX-500S	Max Printing Size	φ50 × 160 mm
Max Printing Speed	800 pcs/hr	Max Screen Frame	700 × 350 mm
Max Printing Area	500 × 200 mm	Printing Length	≤ 250 mm
Pressure	5 Bar	Voltage and Power	220V 20W
Gross Weight	120 kg	Dimension	960 × 900 × 1380 mm